Not always. A dripping tap or a toilet that keeps running can usually be stopped at the small isolation valve on the pipe underneath it. That stops the leak without turning off water to the whole house. A burst pipe is different: it needs a plumber as soon as possible, with the water kept off until they arrive.
Close an isolation valve with a flat head screwdriver. A quarter turn, so the slot sits across the pipe, turns it off. If the leak carries on, use the stop tap instead. It is usually under the kitchen sink, but can be in a downstairs toilet, a garage or under the stairs. Turn it clockwise and slowly, and never force it.
With a burst pipe, switch the power off at the fuse box if water may have reached the electrics. Keep clear of any ceiling that is bulging. Then flush the toilets and open the cold taps to drain what is left in the pipes.
A slow leak is still worth sorting, as a leaking toilet can waste between two hundred and four hundred litres of water a day. If the stop tap will not turn, a tap is badly damaged, or you are unsure what is causing the drip, call me. I cover Loughborough as Tami Plumbing, and here is how I handle emergency plumbing. Tell me where the water is coming from and whether it is off yet.



