When an unvented cylinder stops giving you hot water, start with its own thermostat or programmer and check it shows the right settings. After a long power cut, the timer clock may need resetting to the correct time. If the hot taps run but only weakly, the mains could be the cause. An unvented cylinder runs on mains pressure, so low pressure coming in means weak hot taps too.
Next, look at the tundish, which sits near the pressure relief valve and lets you see when water is escaping. A drip there points to too much pressure or a faulty relief valve. If water is flowing through it steadily, call straight away. Check the overflow pipe from the tundish is clear as well, because a blocked pipe can let pressure build up.
Leave the safety valves themselves alone. Only a qualified professional should install or maintain an unvented cylinder and its valves. It needs a service every year, and makers usually make that service a condition of the warranty.
Catching a drip early means a pressure problem gets looked at before it builds, and a yearly service helps keep the warranty in place. If the settings are right and there is still no hot water, or the tundish is dripping, ring me. At Tami Plumbing I work on hot water cylinders across Wollaton, and you can read more on my Hot Water Cylinders page.



